This type of lumber product
has less rigidity (modulus of elasticity)
but higher ultimate load (modulus of rupture)
than wood lumber. It exhibits very little
creep (long-term deformation under load).
It typically demonstrates 100% elastic revovery
from an applied load. However, it is not
recommended for use as a true structural
member at this time. Examples of applications
that are inappropriate would be load bearing
walls, deck framing, and floor joists. It
is recommended that an engineering study
be performed prior to use of CorrectDeck.
When utilizing CorrectDeck
products for decking or flooring, careful
attention must be paid to joist spacing;
joist spans will depend upon which CorrectDeck
deck board is installed.
CorrectDeck products can
be fabricated and installed with the same
tools used to work wood lumber. The product
will cut and drill very cleanly, as there
is no grain to split or chip. It is necessary
to pre-drill when fastening. CorrectDeck
double grooved deck material (Channeled)
is installed with a hidden fastening system
that allows installation from the top of
the deck.
|
Basic Uses & Limitations
